Gliderol BLACK (RAL9005) Industrial Panoramic ALU40 Sectional Door

Gliderol BLACK (RAL9005) Industrial Panoramic ALU40 Sectional Door

Code: SPD-BLACK
  • Now From 2.766,36 € (inc. VAT)
Item in Stock   |   Usually dispatched within 24 hours
Loading...
Door Width = Opening width. Door Height = Opening height.

Standard Lift Track - recommended if you have up to 1 metre of headroom above the opening. Minimum headroom requirement is 430mm. If you don't have enough headroom you can select Standard LOW headroom which only requires 240mm headroom.

Vertical Lift Track - recommended if you have enough headroom for the door to raise fully up above the opening.

High Lift Track - is the most common option where you have a lot of headroom above the opening but not enough for a vertical lift track. Recommended if you have more than 1 metre of headroom. A high lift track will allow your door to raise above the opening, closer to the roof before turning horizontally into the space.

- If you are replacing an existing door it is really important that you measure the existing spring shaft centre line (the measurement from the floor to the existing shaft/barrel that the springs are attached to). This is so the new door can utilise the existing fixing points within the building. We recommend using a laser measure for precision. 

Existing spring shaft centre line is the measurement from the floor to the existing shaft/barrel that the springs are attached to. We recommend using a laser measure for precision. This is so the new door can utilise the existing fixing points within the building.

Headroom requirement above the clear opening: lift + 400 mm, where lift is defined as the dimension from the bottom face of the lintel to the bottom face of the horizontal tracks.

Gliderol’s ALU40 panoramic industrial sectional doors are perfect for industrial environments where light and visibility are paramount. These high quality double glazed doors have thick 40mm aluminium profiles and are fully CE UK-CA certified to the highest standard. EN13241 compliant.


Automatic doors come with an industry leading electric GFa motor with TS971 deadman controls. Manual doors come with a steel chain hoist 1:4 ratio.The speed for this door is ± 174mm/sec.


Before we manufacture your industrial panoramic sectional door we will provide you with full CAD drawings to approve. We manufacture bespoke made-to-measure industrial doors to any specification. If you don’t find what you need, contact us directly for a bespoke quotation.


  • Maximum size available is 8m wide x 6m high (surface area 48 m2).
  • Each column of double glazed acrylic panel is up to 1265mm wide.
  • U-value based on a door size 5m x 5m is 3.87 W/m2 K.
  • Wind load resistance class 3-4 according to EN12424, or up to 12-13 Beaufort (118 - 149 km/h).
  • Wind and waterproof connections between the sections.
  • The interior side of the profiles are colour matched to outside as standard.
  • Steel cables with sixfold safety built in as standard.
  • Finger pinch protection panels.


Technical details electric drive

• GFa motor and control box TS971 with deadman controls.

• Single or three phase power options.

• Control voltage: 24Vdc.

• IP54 Protection.

• Emergency hand chain hoist at operating height.

• Spring break protection.

• Anti lift protection.

• Status and information display (including any recent faults).

• Maintenance-cycle counter.


Profiles and frames available in any standard RAL colour.


Industrial Door Headroom and side-room requirements:

The doors come with front torsion springs as standard and require a minimum of 475mm headroom.

Manual doors require 220mm side-room for the chain hoist side and 80mm on the opposite side.

 

 

Automated doors require 250mm-480mm* side-room on the motor side and 80 mm on the opposite side (*depending on track specification).

The design options are virtually limitless, allowing each door to be tailored precisely to its intended application. Contact us for more if you can’t find what you’re looking for.


Advice on cleaning windows in industrial doors to prevent surface damage, please observe the following instructions when cleaning and maintaining windows:

- Always thoroughly rinse the window first with running water (garden hose).

- Washing-up liquid is the only type of detergent that may be used.

Never use:

- A high pressure cleaner.

- Abrasive cleaning agents, solvents or window cleaner.

- Squeegees and hard or sharp cleaning tools such as scrapers, razor blades or paint spatulas.

Garage Doors - UK mainland delivery only, excludes certain Scottish Highland postcodes. Please ensure the road access is suitable for a Heavy Goods Vehicle and there is suitable space to park safely to offload your door.

We operate a 1 driver delivery service. Our driver will require assistance from someone able-bodied to help unload the door to an appropriate place which is not an excessive distance from the delivery truck.


Garage Door Parts - are dispatched within 1 working day and delivered by DPD or Royal Mail.

Single Skin Roller Doors - usually delivered within 5 - 14 working days by our inhouse team of delivery drivers.

Insulated Roller Doors - usually delivered within 5 - 14 working days by our inhouse team of delivery drivers.

Up & Over Doors - usually delivered within 6 weeks by our inhouse team of delivery drivers.

Side Hinged Doors - usually delivered within 8 weeks by our inhouse team of delivery drivers.

Insulated Side Hinged Doors - usually delivered within 8 weeks by our inhouse team of delivery drivers.

Sectional Doors - usually delivered within 8 weeks by our inhouse team of delivery drivers.

Industrial Sectional Doors - usually delivered within 6 weeks by our inhouse team of delivery drivers.

Entrance Doors - usually delivered within 2 weeks by our inhouse team of delivery drivers.

Fire Doors - usually delivered within 4 weeks by our inhouse team of delivery drivers.

Gates - usually delivered within 3-4 weeks by our inhouse team of delivery drivers.

 

Returns

All garage doors are made to order. Once manufactured cancelations or returns can not be accepted.